Fork Mounted Jibs and Cranes for companies with existing fork lift trucks. These lifting attachments help save costs by turning your fork lift into a crane that can work indoors and outdoors with various loads.
When a greater lift height is required or a lift over a static obstruction the High Lifting Jib is the perfect solution, with the same attributes as the carriage Mounted Jib.
Approximate lead time: 2-3 days. If for any reason this product is currently unavailable one of our team will give you a call to discuss expected lead times.
Centre of gravity at 410 or 430 mm
Model | ITA / FEM Class | Capacity (kg) at 500 mm Load Centre | Capacity (kg) at 1500 mm Load Centre | Capacity (kg) at 1750 mm Load Centre | Weight (kg) |
---|---|---|---|---|---|
IHJ-1.0 | 2 | 1000 | 500 | 405 | TBA |
IHJ-2.0 | 2 | 2000 | 800 | 420 | 253 |
IHJ-3.0 | 3 | 3000 | 900 | 430 | 253 |
IHJ-4.0 | 3 | 4000 | 1000 | 470 | 253 |
IHJ-5.0 | 4 | 5000 | 1850 | 1400 | 276 |
IHJ-6.0 | 4 | 6000 | 2450 | 1650 | 310 |
IHJ-7.0 | 4 | 7000 | 4125 | 3500 | 310 |
Low Liner Jib
An inexpensive jib which gives longer reach capabilities for picking up a product which is difficult to palletise or for handling motors, press tools etc. from positions which are hard to access.
Features
- Low profile design to allow better access to restricted areas
- All lifting points rated to suit the host truck to avoid overloading
- Multiple hook positions for various jobs on site
Model Ref | Suitable For Minimum Truck Capacity [kg] | Capacity At First Hole [kg] | First & Last Hole Positions [mm] |
LLJ 500-0.8 | 1000 | 800 | 500 / 1750 |
LLJ 500-1.0 | 1300 | 1000 | 500 / 1750 |
LLJ 500-1.3 | 1500 | 1300 | 500 / 1750 |
LLJ 500-1.8 | 2000 | 1800 | 500 / 1750 |
LLJ 500-2.2 | 2500 | 2200 | 500 / 1750 |
LLJ 500-2.7 | 3000 | 2700 | 500 / 1750 |
LLJ 500-3.1 | 3500 | 3100 | 500 / 1750 |
LLJ 500-3.5 | 4000 | 3500 | 500 / 1750 |
LLJ 500-4.4 | 5000 | 4400 | 500 / 1750 |
Operation
- Remove existing forks from forklift carriage.
- Position Jib so as the load beam is parallel to the finish floor level.
- Remove the quick release bottom hangers by pulling out the safety ‘R’ clip and retracting the retaining pin.
- Position the forklift behind the Jib backplate and centralise the forklift carriage with the jib backplate.
- Drive towards the Jib backplate with the mast tilted forward and hook the top carriage rail under the top hangers of the Jib backplate, ensuring that the location peg on the jib backplate locates into the central castellation of the forklift carriage.
- Whilst raising the forklift carriage tilt mast back to the vertical position until the attachment is clear of the finish floor level.
- Reposition the quick release bottom hangers ensuring the safety ‘R’ clip is correctly inserted.
- Position the swivel hook and shackle to the desired lifting point, ensuring that the shackle is adequately tightened.
- The attachment is now ready for use.
Standard Features
- Multi hook positioning from 1000-1750 load centres
- Supplied complete with Swivel hook and bow shackle
- Quick release bottom hangers supplied as standard
- Lifting eye at centre of gravity for ease of movement and mounting on to forklift
- Painted bright orange for safety
Fork Mounted Jib
A fixed length jib which mounts onto the forks of any truck. The ideal attachment for lifting and conveying loads which are not suitable for, or do not require, palletising.
Features
- Raised beam position for added lift height
- Long jib arm to reach otherwise inaccessible places
- Multiple hook positions for addedflexibility on site
- Large fork pockets for instant drive in and lifting
Model Ref | Suitable For Minimum Truck Capacity [kg] | Capacity At First Hole [kg] | First & Last Hole Positions [mm] |
FMJ 500-0.8 | 1000 | 500 | 1000 / 1750 |
FMJ 500-1.0 | 1300 | 630 | 1000 / 1750 |
FMJ 500-1.3 | 1500 | 680 | 1000 / 1750 |
FMJ 500-1.8 | 2000 | 1100 | 1000 / 1750 |
FMJ 500-2.2 | 2500 | 1400 | 1000 / 1750 |
FMJ 500-2.7 | 3000 | 1450 | 1000 / 1750 |
FMJ 500-3.1 | 3500 | 1900 | 1000 / 1750 |
FMJ 500-3.5 | 4000 | 2000 | 1000 / 1750 |
FMJ 500-4.4 | 5000 | 2700 | 1000 / 1750 |
Carriage Mounted Jib
One of our most popular carriage mountedforklift and telehandler jib, the Easy Reach forklift jib comes with a low beam profile to allow access in to confined spaces.
Mounted directly to the carriage of the forklift truck or telehandler, our carriage mounted jibs provide the solution toconverting your lift truck or telehandler into a dedicated lifting crane.
The forklift jib is 1800mm long and comes with various lifting points on the underside to allow for adjustment when handling loads of different lengths
Model Ref | Beam Length [mm] | Number of of Lifting Points | Hook & Shackle |
ERJ | 1800 | Six | Yes |
Features
- Mounts directly onto truck carriage so forklift can be positioned closer to the load
- Jib rated to suit the capacity of the lift truck, reducing wear and tear on the lift truck and possibility of overloading
- Multiple hook positions for flexible load handling whilst reducing handling costs
- Long jib arm to reach otherwise inaccessible places (i.e. machinery motors), helping to reduce factory maintenance costs
- Wide carriage backplate to reduce sideways movement thus reducing damage from load swinging excessively
- 'CE' marked and supplied with Certificate of Conformity for Health & Safety Regulations
Forklift Jib Attachment
When height is not at a premium, but maximum lift capacity is critical, the Fork Mounted Jib allows the movement of long and awkward loads from inaccessible locations with the potential of 4 different lifting centres.
Approximate lead time: Approx 2-3 days
Centre of gravity 670 mm
Model | Capacity (kg) | Weight (kg) |
---|---|---|
IFJ-1.0-OP | 1000 at 1000 mm load centre | 141 |
IFJ-1.5-OP | 1500 at 1000 mm load centre | 146 |
IFJ-2.0-OP | 2000 at 1000 mm load centre | 152 |
IFJ-3.0-OP | 3000 at 1000 mm load centre | 159 |
IFJ-4.0-OP | 4000 at 1000 mm load centre | 171 |
IFJ-5.0-OP | 5000 at 1000 mm load centre | 183 |
Operation
- Position the forks to the correct distance apart to locate into fork pockets.
- Remove the heel pins from the attachment.
- Drive the forks into the fork pockets.
- Insert fork pocket heel pins directly behind the heel of the fork and attach safety lynch pin into hole provided.
- Position the swivel hook and shackle to the desired lifting point, ensuring that the shackle is adequately tightened.
- The attachment is now ready for use.
Standard Features
- Multi hook positioning from 1000-1750 load centres
- Supplied complete with single swivel hook and bow shackle
- Maximum fork section 150 x 50 mm at 435 mm centres
- Zinc plated heel pins for safe attachment to truck
- Painted bright orange for safety

Forklift Attachments Shop
Providing you with a fork or attachment that’ll enable you to work more efficiently or flexibly, make your working environments much safer, plus more efficient. Both standard forks and attachments and bespoke solutions available.
Economy Adjustable Fork Mounted Hook
Capacity: 1000kg.
Max. Fork Section: 100 x 45mm at 220mm centres.
Lead Time: 3-5 Working Days.
£179.40
Boot Wash Station - 2 Person Back to Back
2 Person Unit.
Size: 710 x 1100 x 1460mm (WxHxL).
Lead Time: 3-5 Working Days.
£900.90
Boot Wash Station - 3 Persons Inline
Size: 1100 x 1100 x 1460mm (WxHxL).
Finished in bright orange and silver.
Lead Time: 3-5 Working Days.
£1,076.40
Mini Towable Salt Spreader
Hopper Capacity: 190 Litres.
Painted Red with large pneumatic tyres.
Lead Time: 3-5 Working Days.
Call for Price: 01752 690622
Fork Mounted Hydraulic Gritter
Spread all types of salt, wet or dry.
Capacity: 250kg.
Lead Time: 3-5 Working Days.
Call for Price: 01752 690622
Wheelie Bin Lifter - 240 Litre
Suitable for 90-240L Wheelie Bins.
Painted bright orange for safety.
Lead Time: 3-5 Working Days.
Call for Price: 01752 690622
Wheelie Bin Lifter - 1100 Litre
Suitable for 660L and 1100L Wheelie Bins.
Painted bright orange for safety.
Lead Time: 3-5 Working Days.
Call for Price: 01752 690622
Fork Mounted High Lift Access Platform
Comes with Slide Gate.
Capacity: 250kg.
Lead Time: 3-5 Working Days.
£1,375.00
Fork Mounted Folding Access Platform
Capacity: 250kg.
Assembled and folded in a matter of minutes.
Lead Time: 3-5 Working Days.
£895.70
Crane Mounted Access Platform
With both Crane Slung & Fork Mounted options.
Capacity: 500kg.
Lead Time: 3-5 Working Days.
£1,671.25
Forklift Loading Platform
Capacity: 1000kg.
Base Size: 1900 x 1500mm.
Lead Time: 3-5 Working Days.
Call for Price: 01752 690622
Crane Mounted Drum Tilter
Capacity: 360kg.
Crank Handle or Looped Chain Control.
Lead Time: 3-5 Working Days.
£1,086.80
Fork Mounted Drum Tilter
Crank Handle or Looped Chain Control.
Capacity: 360kg.
Lead Time: 3-5 Working Days.
£1,086.80
Low Level Skip
Capacity: 300kg or 600kg.
Weight: 215kg or 245kg.
Lead Time: 3-5 Working Days.
£1,071.20
Combi Skip
Capacity: 400, 750, 960, 1100 or 1500kg.
With 4 way fork pocket entry.
Lead Time: 3-5 Working Days.
£877.50
Bottom Emptying Skip
Capacity: 550kg, 750kg or 950kg.
Comes with zinc plated heel pins.
Lead Time: 3-5 Working Days.
£1,111.50
Fork Mounted Access Platform
Capacity: 250kg.
Available with a Lift Up Bar or Side Gate.
Lead Time: 3-5 Working Days.
£629.20
Fork Mounted Snow Plough
Blade Widths: 1250, 1500 or 1800mm.
Fully Galvanised.
Lead Time: 3-5 Working Days.
Call for Price: 01752 690622
Fixed Fork Mounted Hook
Capacity: 1000/2000/3000/4000/5000kg.
Bright orange for safety.
Lead Time: 3-5 Working Days.
£395.20