We have three sizes of economical Budget walk-in chemical storage stores suitable for the storage of oils, paints, solvents and lubricants with compliance to legislation regarding the bunded storage of any spills. Bund capacities are 415, 560 and 727 litres. We can also supply bespoke sizes should you need something different.

secure walk in steel store

Our economy range of walk-in stores MDL2M, MDL3M & MDL4M are fully compliant with UK regulations and come with a 12 month guarantee.

MDL2M Secure Walk in Store 

MDL2M walk in bunded store

The side and roof panels are manufactured from 0.60mm cold rolled corrugated galvanised steel and for additional strength the unit has a structural frame which is fitted at each end and the centre of the unit. The double doors, fitted with 3 upper and 3 lower vents in each door, are located in one of the “short” sides of the unit and are secured with a Kale mortis lock with cylinder (152 R).

Inside the unit is fitted with two sets of shelves (60 kg/shelf distributed load) on each of the “long” side. The sump is manufactured from 2mm structural grade galvanised steel and is fitted with base plinths to keep the underside out of contact with the ground.

NOTES: This unit will be delivered by an articulated vehicle, therefore please ensure that a vehicle of this size can access your premises before ordering and advise us accordingly. You will require an appropriate size/capacity fork lift truck to offload this item from the delivery vehicle. Our standard delivery doesn’t include any offloading.

The unit must be positioned on a solid level surface, ideally concrete of circa 150 mm in depth and 100mm bigger overall than the unit. The purpose of this is to ensure the unit does not settle unevenly when loaded.

MDL2M Specifications and details

External size: 2184 mm L x 2168 mm W x 2198 mm H
Internal size 2018 mm L x 2080 mm W x 1935 mm H
Sump capacity: 415 litres
Colour: Galvanised silver
Tare weight: 525 kg

 

MDL3M Secure Bunded Galvanised Store

MDL3M secure bunded walk in store

The side and roof panels are manufactured from 0.60mm cold rolled corrugated galvanised Steel and for additional strength the unit has a structural frame which is fitted at each end and the centre of the unit. The double doors, fitted with 3 upper and 3 lower vents in each door, are located in one of the “short” sides of the unit and are secured with a Kale mortis lock with cylinder (152 R). Inside the unit is fitted with two sets of shelves (60 kg/shelf distributed load) on each of the “long” side.

The sump is manufactured from 2mm structural grade galvanised Steel and is fitted with base plinths to keep the underside out of contact with the ground.

NOTES: This unit will be delivered by an articulated vehicle, therefore please ensure that a vehicle of this size can access your premises before ordering and advise us accordingly. You will require an appropriate size/capacity fork lift truck to offload this item from the delivery vehicle. Our standard delivery doesn’t include any offloading.

The unit must be positioned on a solid level surface, ideally concrete of circa 150 mm in depth and 100mm bigger overall than the unit. The purpose of this is to ensure the unit does not settle unevenly when loaded.

External size: 2184 mm L x 2928 mm W x 2198 mm H
Internal size 2018 mm L x 2840 mm W x 1935 mm H
Sump capacity: 560 litres
Colour: Galvanised silver
Tare weight: 650 kg

MDL3M Specifications and details

 

MDL4M Economy store with 727 litres sump

MDL4M large secure bunded store

Image at the top of the page is also the MDL4M Store

The side and roof panels are manufactured from 0.60mm cold rolled corrugated galvanised Steel and for additional strength the unit has a structural frame which is fitted at each end and the centre of the unit. The double doors, fitted with 3 upper and 3 lower vents in each door, are located in one of the “short” sides of the unit and are secured with a Kale mortis lock with cylinder (152 R). Inside the unit is fitted with two sets of shelves (60 kg/shelf distributed load) on each of the “long” side.

The sump is manufactured from 2mm structural grade galvanised Steel and is fitted with base plinths to keep the underside out of contact with the ground.

NOTES: This unit will be delivered by an articulated vehicle, therefore please ensure that a vehicle of this size can access your premises before ordering and advise us accordingly. You will require an appropriate size/capacity fork lift truck to offload this item from the delivery vehicle. Our standard delivery doesn’t include any offloading.

The unit must be positioned on a solid level surface, ideally concrete of circa 150 mm in depth and 100mm bigger overall than the unit. The purpose of this is to ensure the unit does not settle unevenly when loaded.

External size: 2184 mm L x 3778 mm W x 2198 mm H
Internal size 2018 mm L x 3690 mm W x 1935 mm H
Sump capacity: 727 litres
Colour: Galvanised silver
Tare weight: 815 kg

Please provide enough information so that our reply to your message is as quick as possible. If you need to send a sketch or drawing use the email address. This email address is being protected from spambots. You need JavaScript enabled to view it.

Hazardous Goods Storage Shop

Hazardous Goods Storage Shop

Hazardous Goods Storage, including Cabinets for hazardous and flammable goods, that comply with all relevant COSHH regulations. Drum Storage Units, IBC Storage Units and Gas Bottle Cages. As well as Drum and IBC accessories.


Drumcage

Size: 1215 x 1265 x 2080mm.

A great choice for the safe storage of hazardous substances.

Lead time 2-3 working days.

£2,406.00

Tuffcage

Size: 1300 x 1240 x 1800mm.

One-piece folding security cage for storing your gas cylinders and equipment.

Delivery: 3 working days.

£1,184.00

Drumbank Storage for IBC

Size: 1500x1530x2210mm (WxDxH).

Store items like, 50 gallon drums, jerry cans, & IBCs.

Delivery: 3 working days.

£3,839.00

Drum Spill Pallet for 1 Drum

Size: 900 x 700 x 525mm (LxWxH). 

Sump: 225L. 

Lead time - 1 week.

£224.00

Drum Spill Pallet for 2 Drums

Size: 1220 x 820 x 330mm (LxWxH). 

Sump: 240L. 

Lead time - 1 week.

£190.00

Drum Spill Pallet for 3 Drums

Size: 1785 x 780 x 240mm (LxWxH). 

Sump: 228L. 

Lead time - 1 week.

£328.00

Drum Spill Pallet for 4 Drums

Size: 1280 x 1285 x 275mm (LxWxH).

Sump: 230L.

Lead time - 1 week.

£237.00

Drum Spill Pallet for 4 Drums High Capacity Sump

Size: 1220 x 1220 x 495mm (LxWxH). 

Sump: 440L. 

Lead time - 1 week.

£260.00

Drum Spill Pallet for 8 Drums

Size: 2560 x 1350 x 510mm (LxWxH).

 Sump: 1140L. 

Lead time - 1 week.

£875.00

Polyethylene Hard Covered Drum Spill Pallet - 2 Drums

Size: 1490 x 990 x 1690mm (LxWxH).

Sump: 230L.

Lead time - 1 week.

£891.00

Polyethylene Hard Covered Drum Spill Pallet - 4 Drums

Size: 1470 x 1420 x 2070mm (LxWxH). 

Sump: 410L. 

Lead time - 1 week.

£1,259.00

Hard Covered Spill Pallet for IBC

Size: 1840 x 1425 x 2405mm (LxWxH). 

Sump: 1100L.

Lead time - 1 week.

Call for Price: 01752 690622

Hard Covered Spill Pallet for 2 x IBC

For either 2 x 1000ltr IBC or 8 x 205 litre drums. 

Size: 2625 x 1430 x 2110mm (LxWxH). 

Sump: 1140L.

Call for Price: 01752 690622

Hard Covered Spill Pallet for 4 x Drums

To hold 4 x 205L drums. 

Size: 1480 x 1385 x 1865mm (LxWxH). 

Sump: 410L. Lead time - 1 week. 

Call for Price: 01752 690622

Drum Cover for 205L Drums

Size: 650 x 70mm (D x H). 

Suitable for 200L Drums.

Lead time: 1 week.

£40.00

Tight Fit Drum Lid for 205L Drums

Size: 630 x 160mm (DxH).

Suitable for 200L Drums.

Lead time: 1 week.

£40.00

Drum Funnel with Lid for 205L Drums

Size: 610 x 230mm (D x H). 

Suitable for 200L Drums.

Lead time: 1 week.

£63.00

Drum Funnel for 205L Drums

Size: 870 x 240mm (DxH). 

Suitable for 200L Drums.

Lead time: 1 week.

£74.00

IBC Funnel and Lid for 1000L IBC

Size: 640 x 150mm (DxH).

Suitable for 1000L IBCs. 

Lead time: 1 week.

£99.00

IBC Overflow Tray for 1000L IBC

Size: 525 x 545 x 835mm (LxWxH). 

Suitable for 1000L IBCs.

Lead time: 1 week.

£134.00

Vat GB591551821 Company Number 02906480 - 1994
Dun and Bradstreet Number (581590544)
NATO Code Number (NCAGE KD520)
EORI Number GB591551821000

Twitter Account

Facebook

logo stripe

Merlin Industrial Products @ 2022 Errors and Omissions Excepted. Part of the Meddings Thermalec Group. 

M logo

Merlin Industrial Products Ltd.
Unit A43-A44, Kingsley Close, Lee Mill Industrial Estate, Ivybridge, DEVON PL21 9LL. United Kingdom

Opening hours, 8am to 5pm, Monday to Thursday, and 8 to 12 on Friday

Email sales @ merlin-industrial.com

Call 01752 690622 / 0800 0418 650 (UK)