Small but very useful skips, ideal where access is a problem and where large amounts of waste are not generated. These Mini Skips are especially suited for use in production areas where space is limited e.g. under power presses and other production machines for collecting swarf, leaking coolant and cutting fluids.

Mini Skips Contact 400

Galvanized Mini Skips

galvanized mini skip rear view

This brand new galvanised forklift tipping bin has never been used and comes with a hot-dipped galvanised finish, making the skips ideally suited for when working in corrosive environments or where corrosive waste is being put into the skip.

Manufactured with a regular duty 3 mm thick steel body and heavy-duty underframe, the tipping bin is the perfect solution to waste handling when non-corrosive properties are required.

Emptying of the forklift skip contents is carried out by a simple-to-operate release mechanism, which, when activated, allows the tip skip to roll forward and empty.

Model RFS 40L-GALV

  • Volume Capacity 0.4 cubic metres
  • Overall length, 1360 mm
  • Overall width 925 mm
  • Overall height 776 mm

Features

    • Manufactured from mild steel with a hot dipped Galvanised finish, offering non-corrosive properties
    • Regular duty 3 mm thick steel tipping bin ensures strong, durable properties
    • Full width release handles to eliminate the need to have to lean in between the skip and the truck mast for tipping

• Heavy-duty steel under frames to ensure long service life properties

  • Twin locking mechanisms for added safety to ensure safe locking when skips are loaded unevenly
  • Pre-drilled castor plates to allow retro fitment of castors if need be (no on-site welding required)
  • Safety security chains ensure skips are safely retained to the lift truck without risk of slipping off the truck forks
  • Pull cord fixing points to both left and right-hand sides, allows easy retro fitment if required
  • Bolted tipping handle assembly allows easy replacement if required (no welding required)
  • 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

 

Stainless-Steel Mini Skips

stainless steel mini tipping skip

Fully stainless steel in construction, our range of stainless-steel tipping skips are designed for use primarily in the food and drinks industry, where corrosion resistance and the minimisation of contamination is vital.

Every part of the tipping bin is manufactured from stainless steel, making it suitable for pressure washing or steam cleaning.

Our stainless-steel tipping skips, with spark proof properties, can come ATEX certified if required, allowing for use in potentially hazardous and explosive atmospheres.

Features

    • Manufactured entirely from stainless steel, offering spark proof non-corrosive properties
    • Regular duty 3 mm thick steel tipping bin ensures strong, durable properties
    • Full width release handles to eliminate the need to have to lean in between the skip and the truck mast for tipping

• Heavy-duty steel under frames to ensure long service life properties

  • Twin locking mechanisms for added safety to ensure safe locking when skips are loaded unevenly
  • Pre-drilled castor plates to allow retro fitment of castors if need be (no on-site welding required)
  • Safety security chains ensure skips are safely retained to the lift truck without risk of slipping off the truck forks
  • Pull cord fixing points to both left and right-hand sides, allows easy retro fitment if required
  • Bolted tipping handle assembly allows easy replacement if required (no welding required)
  • 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

 

Model Ref Volume Capacity
[M3]
O/all Length
[mm]
O/all Width
[mm]
O/all Height
[mm]
RFS 40L-SS 0.40 1360 925 776
RFS 80L-SS 0.80 1718 956 982
RFS 120L-SS 1.20 1718 1300 982
RFS 160L-SS 1.6 1718 1700 982
RFS 200L-SS 2.0 1718 2125 982

Mini Steel Tipping Skip

mini tipping steel skip

 

Manufactured to a smaller size than our standard range of forklift tipping skips, this mini tipping skip is ideal for placing underneath metal punching machines and other machines where collection of small metal etc is required.

The miniature size of this tipping skip makes it suitable for placing in areas of confined space, and with castors fitted as standard, the skip is easy to manoeuvre and position accordingly.

The skip is suitable for accepting forklift forks up to 140 mm wide x 60 mm thick

Model RFS 10L-C

  • Volume Capacity 0.1 cubic metres
  • Bin length, 743 mm
  • Bin width 430 mm
  • Bin height 320 mm

Please add enough information so that our reply to your message is as quick as possible.
Please check that your email address is correct before posting.

Vat GB591551821 Company Number 02906480 - 1994
Dun and Bradstreet Number (581590544)
NATO Code Number (NCAGE KD520)
EORI Number GB591551821000

Email sales @ merlin-industrial.com

Merlin Industrial Products @ 2022 Errors and Omissions Excepted

Call 01752 690622 / 0800 0418 650 (UK)

Merlin Industrial Products Ltd.

Unit A43-A44, Kingsley Close, Lee Mill Industrial Estate, Ivybridge, DEVON PL21 9LL. United Kingdom

Opening hours, 8am to 5pm, Monday to Thursday, and 8 to 12 on Friday

Part of the Meddings Thermalec Group.