Industrial Heating Blankets

Industrial Heating blankets are used in many industries, perfect for ground thawing, curing of materials like composites, repairing of wind turbine rotor blades, and altering the viscosity of liquids. Industrial heating blankets listed below have a wide range of sizes and specifications.

110V Industrial Heating Blanket 0-90ºC

110V Heating Blanket 0-90ºC electric heating blankets makes it easy to heat up material including composite, carbon, epoxy prep reg and ensure a safe and uniform temperature distribution on the surface of the material. The blanket therefore acts as a perfect way to spread heat on the desired material.

Industrial heating mats are used in many industries, including repair of wind turbine blades, repair, and production of both the marine industry and the aerospace industry.

Specifications:

• Nylon Material
• Polyester insulation
• 8 mm insulation for minimal heat loss.
• Teflon Heating Wire
• Grounded Heating system
• Safety Thermostat
• 3M power Cable (no plug provided – available as an optional extra)
• Optimal curing of the composite materials, carbon, and epoxy prep reg.
• The blankets can be put together to cover a larger surface.
• Straps for fixed installation (optional).
• Many sizes in stock.
  

Ideal For:

• Curing composite materials, carbon, epoxy prep reg.
• Curing processes in aerospace industry and in marine industry.
• Wind turbine rotor blade repair and wind turbine rotor blade production.
• All blankets are silver and have Digital 0-90ºC controllers

Sizes: All with Digital Controller Digital 0-90ºC

230V High Temperature Heating Blanket 0-120ºC

230V High Temperature Heating Blanket 0-120ºC make it easy to heat up material including composite, carbon, epoxy prepreg and ensure a safe and uniform temperature distribution on the surface of the material.

Therefore, it acts as a perfect heat spreader on the desired material.

Used in many industries, including repair of wind turbine blades, repair, and production of both the marine industry and the aerospace industry.

Specifications:

• Nylon Material
• Polyester insulation
• 8 mm insulation for minimal heat loss.
• Teflon Heating Wire
• Grounded Heating system
• Safety Thermostat
• 3M power Cable (no plug provided – available as an optional extra)
• Optimal curing of the composite materials, carbon, and epoxy pre impregnated.
• The blankets can be put together to cover a larger surface.
• Straps for fixed installation (optional).
• Many sizes in stock.
• All blankets are Silver and have a Digital 0-120ºC controller

Ideal For:

• Curing composite materials, carbon, epoxy prepreg.
• Curing processes in aerospace industry and in marine industry.
• Wind turbine rotor blade repair and rotor blade production.

Sizes:

Ground Thawing Blanket 3000 × 1000 mm

Ground Thawing Blankets 3000 × 1000 mm are designed for thawing frozen ground surfaces and can be used for a variety of purposes.

In winter and very cold conditions, entrepreneurs and construction workers who need to thaw frozen grounds or surfaces use our electrical ground thawing blankets. The blankets are top-insulated and will only radiate heat in a downwards direction. Designed in durable waterproof and weatherproof materials, our thawing blankets are built to last and can withstand just about any condition.

With the ground thaw heating blanket, you can easily thaw frozen ground and soil. Also frozen pipes, melt ice and snow, and use the blankets as freeze protection for pipelines and other equipment that are in risk of freezing.

Use the blankets for curing purposes as they also work as curing blankets for e.g. curing bridge decks, curing newly laid brick or block walls, precast, masonry walls, concrete, decorative concrete and much more.

Our thawing mats are lightweight and available with either a 2 meter Schuko power cable or a 2 m industrial connector, the blankets have a built-in bi-metal thermostat with an automatic 70 °C temperature.

Installation is very easy and when the job is done, so is the repacking. Simply roll out the mat on the surface where you want to work. Plug in the electrical cord, and you are on the way to a safely thawed surface. When the surface is frost-free, unplug the cord and roll up the blanket.

These curing- and ground thawing blankets will save you time and money and keep the job running.

Technical Information:

• Durable PVC materials.
• Fixed temperature (75 °C).
• 2 m power cable.
• Special sizes produced upon request.
• IP67 Class.
• In normal conditions, the mat thaws up to 30 cm of soil in 24 hours – or up to 60 cm in more sandy soil/ground

Sizes:

230V Silicone Uninsulated Heating Blanket

230V Silicone Uninsulated Heating Blanket are the optimal product when it comes to safely and effectively, having to heat elements to a specific temperature up to 120 °C.

Making it easy to heat up many materials including composite, carbon, epoxy prepreg and ensure a safe and uniform temperature distribution on the surface of the material. The blanket therefore acts as a perfect heat spreader on the desired material.

Used in many industries, including repair of wind turbine blades, repair, and production of both the marine industry and the aerospace industry.

Designed in durable but flexible and light material with the ability of heating to a maximum temperature of 120 °C. This blanket is without insulation, which results in perfect contact and even heat spreading to the material.

Produced with a controllable Jumo thermostat box.

Technical Information:

• Optimal curing of the composite materials, carbon, and epoxy prepreg.
• Available with adjustable Jumo thermostat (0-120 °C).
• 1 meter power cord (no plug).
• Straps for fixed installation (optional).
• Many sizes in stock.
• Special sizes produced upon request.

Ideal For:

• Curing composite materials, carbon, epoxy prepreg.
• Curing processes in aerospace industry and in marine industry.
• Wind turbine rotor blade repair and rotor blade production.

Sizes:

All Uninsulated industrial heating blankets. Temperature up to 120 °C. Colour Orange.

Heating Blankets Online Shop

Industrial Heating blankets are used in many industries, industrial heating blankets are perfect for ground thawing, curing of materials like composite, repairing of wind rotor blades, altering the viscosity of liquids and for production in both the marine and the aerospace industry and for areas exposed to the elements that may not function below a certain temperature. Digital and Analogue controllers allow the temperature to be set and left to operate independently.

SEE NOW