Gate castors are a specialist system designed to help take out the variation in ground heights and are mostly used on large gates travelling over uneven ground. The maximum height difference is 75 mm or 3 inches with a weight on the castor of no more than 70 kg.

Gate Castors 400

The Gate Castor has a nominal weight loading capacity of 70 kg and is designed to support the gate over its travel. Ideally fitted onto a new gate it will help stop the hinges wearing over time. Some customers fit a wear plate into the driveway so that the rubber tyre runs more smoothly.


Specially designed castors to help support the endsof wide gates. Fabricatedsteel housing with black finish.
Available with plate fixing. For wheel options please download the pdf below. Please Note: Castersare not available with pneumatic wheels.

diameter graphic


weight graphic


For full details, including dimensions and part numbers, please open or download the PDF

Please see our range here

Fabricated fixed sprung loaded gate castor with a side mounted plate fixing. Fitted with a black elastic rubber tyre on cast iron centre wheel with ball bearings. Wheel diameter 100mm, Tread width 38 mm, Overall height 375 mm, Fixing Hole M8 drilled on 85 mm centres.

Load capacity 75 kg. Spring compression starts at 20 kg

Additional Information

Wheel Dia (mm) 100
Castor Fixing Plate
Castor Option Fixed
Load Capacity 75
Bearing Type Ball
Tread (mm) 38
Wheel Material Black Elastic Rubber on Cast Iron


Please add enough information so that our reply to your message is as quick as possible.
Please check that your email address is correct before posting.

Vat GB591551821 Company Number 02906480 - 1994
Dun and Bradstreet Number (581590544)
NATO Code Number (NCAGE KD520)
EORI Number GB591551821000

Email sales @

Merlin Industrial Products @ 2022 Errors and Omissions Excepted

Call 01752 690622 / 0800 0418 650 (UK)

Merlin Industrial Products Ltd.

Unit A43-A44, Kingsley Close, Lee Mill Industrial Estate, Ivybridge, DEVON PL21 9LL. United Kingdom

Opening hours, 8am to 5pm, Monday to Thursday, and 8 to 12 on Friday

Part of the Meddings Thermalec Group.